39.0 mm piston with a 1.5 mm rectangular piston ring featuring flank retention (FS) for Puch Supermaxi LG1 & LG2 mopeds with catalytic converters.
You can find the detailed piston dimensions, as shown in the technical drawing, in the product details. You can also find information about common piston rings, their contact surfaces, and retaining methods in the legend accompanying the images.
The second-oversize piston is used for bored and honed cylinders.
The piston kit includes a piston pin, piston clips, and piston rings.
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find the necessary installation tools, piston rings, piston pin retainers, etc., in the accessories section.
A quality product from the Italian manufacturer Meteor.
| Nominal diameter | 39 mm |
| Manufacturer | Meteor |
| Ø outside piston (A) | 39 mm |
| Compression height (C) | 24 mm |
| Curvature (D) | 2.3 mm |
| Total piston height (E) | 55.3 mm |
| Number of piston rings (F) | 1 pcs |
| Piston ring mold | Rectangular ring |
| Ø piston pin (B) | 12 mm |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 1.5 mm |
| Weight piston kit | 86 g |
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats: 10 mm · Width across flats: 17 mm
EUR 24.00
Explore categories from Piston
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Material: Steel · Surface: blank / oiled · Color: gray · Manufacturer: KMC · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.10
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Total length: 28 mm · Area of application: Tuning · Number of components: 3 pcs
EUR 21.60
Hot
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Surface: blackened · Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
EUR 11.90
Hot
GPO Gear Ring 45 T, Black | Puch Maxi, X30 NG-2AH
Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 94 mm · Manufacturer: GPO · Color: black · Material: Steel · Number of teeth: 45 pcs · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs
EUR 30.00
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 11.90
GPO 38 mm gasket cylinder head 0.2 mm | Puch
Manufacturer: GPO · Material: Aluminum · Place of use: Cylinder head · Thickness: 0.2 mm · Ø cylinder: 38 mm · Ø screw holder: 7 mm · Area of application: Original · Area of application: Standard · Alternative version of the Puch OEM number: 349.1.10.004.1
EUR 3.00
Working late? Evening hours on Thursday until 20:00
