All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
logo_siggnature-bikes

Universal

32358

Siggnature cylinder clamping sleeve 38 mm

EUR 47.90

Incl. 23% VAT.

Product description

Grey anodized aluminium expanding sleeve for clamping 38 mm cylinders for mopeds, mopeds or small motorcycles.

The clamping sleeve is expanded in the cylinder using a mandrel and lock nut. The fixed cylinder can then be easily clamped in the lathe and turned as required.

The smooth anodization and clean chamfered edges protect the raceway from damage.

Clamping range: 37.6 - 38.6 mm
Total length: 60 mm

Note: Delivery does not include the required mandrel. Figure 3 is for illustration purposes with the clamping pin.

You can find more clamping sleeves and a selection of items in the accessories section.

A kick-ass custom product straight from the Siggnature workshop.

ManufacturerSiggnature
MaterialAluminum
Surfaceanodized
Diameter38 mm
Total length60 mm
Area of applicationSpecial tool

Accessories & related products

Siggnature cylinder clamping sleeve 41 mm
undefined

Universal

32356

Siggnature cylinder clamping sleeve 41 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Diameter: 41 mm · Total length: 60 mm · Area of application: Special tool

EUR 47.90

Siggnature cylinder clamping sleeve 44 mm
undefined

Universal

32357

Siggnature cylinder clamping sleeve 44 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Diameter: 44 mm · Total length: 60 mm · Area of application: Special tool

EUR 47.90

Washer M16 large 17/34/4 galvanized

Universal

32957

Washer M16 large 17/34/4 galvanized

Thickness: 4 mm · Material: Steel · Surface: galvanized (blue) · Ø inside: 17 mm · Ø outside: 34 mm · Nominal diameter (thread): 16 mm

EUR 2.30

Nut M16x1.5 fine thread galvanized

Universal

32958

Nut M16x1.5 fine thread galvanized

Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Thread type: MF16x1.5 (fine pitch thread) · Strength class: 8 · Width across flats SW: 24 mm · Height: 13 mm

EUR 9.50

Nut M16x1.5 fine thread low galvanized

Universal

32959

Nut M16x1.5 fine thread low galvanized

Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Thread type: MF16x1.5 (fine pitch thread) · Strength class: 4 · Width across flats SW: 24 mm · Height: 8 mm

EUR 5.40

Hot Hot
Siggnature cylinder clamping tool 38 - 47 mm
undefined
angle-right

Universal

32986

Siggnature cylinder clamping tool 38 - 47 mm

Manufacturer: Siggnature · Material: Steel · Surface: polished · Total length: 154 mm · Thread type: MF16x1.5 (fine pitch thread) · Thread length: 30 mm

EUR 72.00

Siggnature cylinder clamping sleeve 39 mm
undefined

Universal

35092

Siggnature cylinder clamping sleeve 39 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Ø inside: 24 - 34.2 mm · Diameter: 39 mm · Total length: 60 mm · Number of components: 1 pcs · Area of application: Special tool

EUR 47.90

Siggnature cylinder clamping sleeve 40 mm
undefined

Universal

35093

Siggnature cylinder clamping sleeve 40 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Ø inside: 24 - 34.2 mm · Diameter: 40 mm · Total length: 60 mm · Area of application: Special tool · Number of components: 1 pcs

EUR 47.90

Siggnature cylinder clamping sleeve 42 mm
undefined

Universal

35094

Siggnature cylinder clamping sleeve 42 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Ø inside: 24 - 34.2 mm · Diameter: 42 mm · Ø outside: 41.8 mm · Ø outside: 42.8 mm · Total length: 60 mm · Area of application: Special tool · Number of components: 1 pcs

EUR 47.90

Siggnature cylinder clamping sleeve 43 mm
undefined

Universal

35095

Siggnature cylinder clamping sleeve 43 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Ø inside: 24 - 34.2 mm · Diameter: 43 mm · Total length: 60 mm · Number of components: 1 pcs · Area of application: Special tool

EUR 47.90

Siggnature cylinder clamping sleeve 45 mm
undefined

Universal

35096

Siggnature cylinder clamping sleeve 45 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Ø inside: 24 - 34.2 mm · Diameter: 45 mm · Total length: 60 mm · Number of components: 1 pcs · Area of application: Special tool

EUR 47.90

Siggnature cylinder clamping sleeve 46 mm
undefined

Universal

35097

Siggnature cylinder clamping sleeve 46 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Ø inside: 24 - 34.2 mm · Diameter: 46 mm · Total length: 60 mm · Area of application: Special tool · Number of components: 1 pcs

EUR 47.90

Siggnature cylinder clamping sleeve 47 mm
undefined

Universal

35098

Siggnature cylinder clamping sleeve 47 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Ø inside: 24 - 34.2 mm · Diameter: 47 mm · Total length: 60 mm · Area of application: Special tool · Number of components: 1 pcs

EUR 47.90

Moped fans also bought

Exhaust mounting plate | Puch Maxi N
undefined

For: Puch

10481

Exhaust mounting plate | Puch Maxi N

Manufacturer: Made in Portugal · Material: Steel · Surface: galvanized (blue) · Ø mounting hole: 8.5 mm · Ø mounting hole: 11 mm · Cranking (offset): 23 mm · Number of fixing points: 2 pcs

EUR 9.50

Inox
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
undefined

For: Puch

17029

swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi

Drive: Outer edge · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Thread type: MF10x1 (fine pitch thread) · Manufacturer: swiing® revival parts · Thread length: 13 mm · Ø shaft: 9.8 mm · Material: Chrome steel (known as Nirosta®) · Number of components: 3 pcs · Total length: 32 mm · Ø External head: 14 mm · Shank: Yes · Shank length: 9.5 mm · Area of application: Standard

EUR 15.50

swiing® ingenious cylinder clamping tool
undefined

For: Universal · Puch · Sachs

32860

swiing® ingenious cylinder clamping tool

Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Ø inside: 51.6 mm · Ø outside: 99 mm · Height: 22 mm · Number of components: 23 pcs

EUR 72.00

Siggnature cylinder clamping sleeve 41 mm
undefined

Universal

32356

Siggnature cylinder clamping sleeve 41 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Diameter: 41 mm · Total length: 60 mm · Area of application: Special tool

EUR 47.90

Siggnature cylinder clamping sleeve 44 mm
undefined

Universal

32357

Siggnature cylinder clamping sleeve 44 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Diameter: 44 mm · Total length: 60 mm · Area of application: Special tool

EUR 47.90

Hot Hot
Siggnature cylinder clamping tool 38 - 47 mm
undefined
angle-right

Universal

32986

Siggnature cylinder clamping tool 38 - 47 mm

Manufacturer: Siggnature · Material: Steel · Surface: polished · Total length: 154 mm · Thread type: MF16x1.5 (fine pitch thread) · Thread length: 30 mm

EUR 72.00

GPO secondary nozzle PHBG (size 30 - 62.5) of your choice
undefined
angle-right

Universal

34782

GPO secondary nozzle PHBG (size 30 - 62.5) of your choice

Manufacturer: GPO · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: PHBG AD · Carburetor type: PHBG AS · Carburetor type: PHBG BD · Carburetor type: PHBG CS · Carburetor type: PHBG DS · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 32 · Nozzle size: 35 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 62.5 · Total length: 9.5 mm · Drive: Slot

EUR 4.20

Siggnature cylinder clamping sleeve 40 mm
undefined

Universal

35093

Siggnature cylinder clamping sleeve 40 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Ø inside: 24 - 34.2 mm · Diameter: 40 mm · Total length: 60 mm · Area of application: Special tool · Number of components: 1 pcs

EUR 47.90

Siggnature cylinder clamping sleeve 45 mm
undefined

Universal

35096

Siggnature cylinder clamping sleeve 45 mm

Manufacturer: Siggnature · Material: Aluminum · Surface: anodized · Ø inside: 24 - 34.2 mm · Diameter: 45 mm · Total length: 60 mm · Number of components: 1 pcs · Area of application: Special tool

EUR 47.90