Solid clutch puller for the original clutch and clutches with corresponding hole spacing on your Puch Maxi moped / moped and others with E50 engine.
The clutch pack is screwed on cleanly with the black screws. The large, galvanized screw can then be used to apply pressure to the crankshaft to lift the clutch.
The matching, red anodized cover should always be used to protect the KW stub.
Attention: The tool only fits the original clutch and replacement clutches from Surflex.
Clutch hole spacing: 32 mm
Clutch thread: M6
Ø inner shaft cover: 12.1 mm
You can find the corresponding clutch and other special tools for the E50 engine in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 905.6.34.109.0
| Manufacturer | swiing |
| Area of application | (Dis)assembly tool |
| Puch | E50 |
Accessories & related products
HK clutch "Racing" Aramid | Puch E50
Material: Steel · Manufacturer: HK Clutches · Material addition: Chrome steel (known as Nirosta®) · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs
EUR 360.30
Not in stock
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Thickness: 20.9 mm · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Ø outside: 93 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 60.00
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Number of components: 3 pcs · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Total length: 28 mm
EUR 21.50
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm
EUR 11.90
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm
EUR 11.90
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Thickness: 0.5 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø outside: 116 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.50
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Thickness: 1 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø outside: 116 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.70
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Thickness: 22 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Chrome steel (known as Nirosta®) · Recording type: Cone mounting · Ø outside: 94 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 144.10
Collection only possible with online purchase and appointment.
