Additional weight made of stainless steel suitable for HPI ignitions from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds with blower.
The weight is mounted underneath the blower wheel in the accessory.
The weight is mainly used to increase the flywheel mass.
The additional weight means that the engine runs more smoothly when stationary and starting is easier without stalling the engine, which is often the case with a lighter flywheel.
Exceptional product for the highest demands of the swiing® quality brand.
| Manufacturer | swiing® ingenious parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Weight | 100 g |
| Ø outside | 117 mm |
| Ø mounting hole | 5 mm |
| Thickness | 1.8 mm |
| Ø inside | 71.8 mm |
| Number of fixing points | 4 pcs |
| Area of application | Performance, Racing, High End, Tuning |
| Ø bolt circle | 101 mm |
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Ø cable: 7 mm · Manufacturer: HPI · Tension: 12 V · Ø Internal flywheel: 61.5 mm · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Weight: 340 g · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Number of fixing points: 6 pcs · Performance: 60 W · Material: Aluminum · Material: Steel · Mounting type: Screws · Area of application: Tuning
EUR 361.70
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Mounting type: Screws · Weight: 424 g · Number of fixing points: 3 pcs · Area of application: Tuning
EUR 337.60
HPI flywheel (Bosch / Ducati)
Manufacturer: HPI · Thread type: MF27x1 LH (fine/left-hand thread) · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Weight: 337 g
EUR 115.70
HPI stator ignition
Manufacturer: HPI · Number of cables: 4 pcs · Tension: 12 V · Surface: anodized · Color: black · Material: Aluminum · Performance: 60 W · Cable length: 640 mm · Ø inside: 27.5 mm · Ø outside: 90 mm · Number of fixing points: 6 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 80 mm
EUR 180.80
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Surface: anodized · Weight: 87 g · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Ø inside: 39 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Material: Aluminum · Color: black · Ø outside: 120 mm
EUR 72.20
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Ø mounting hole: 5 mm · Thickness: 5 mm · Ø inside: 71.8 mm · Ø outside: 117 mm · Weight: 250 g · Number of fixing points: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 101 mm
EUR 31.20
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Color: red · Material: Plastic · Ø mounting hole: 7.5 mm · Total length: 63 mm · Width: 100 mm · Height: 28 mm · Number of fixing points: 2 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Hole spacing: 80 mm
EUR 367.70
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs
EUR 2.90
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 13.10
EUR 29.11/l
HPI racing ignition 12V with light 60W
Ø cable: 7 mm · Manufacturer: HPI · Tension: 12 V · Ø Internal flywheel: 61.5 mm · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Weight: 340 g · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Number of fixing points: 6 pcs · Performance: 60 W · Material: Aluminum · Material: Steel · Mounting type: Screws · Area of application: Tuning
EUR 361.70
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Surface: anodized · Weight: 87 g · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Ø inside: 39 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Material: Aluminum · Color: black · Ø outside: 120 mm
EUR 72.20
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Ø mounting hole: 5 mm · Thickness: 5 mm · Ø inside: 71.8 mm · Ø outside: 117 mm · Weight: 250 g · Number of fixing points: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 101 mm
EUR 31.20
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing® ingenious parts · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 452.20
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Surface: anodized · Color: red · Material: Aluminum · Ø mounting hole: 6 mm · Height: 13.5 mm · Ø inside: 39 mm · Ø outside: 120 mm · Weight: 87 g · Number of fixing points: 10 pcs · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm
EUR 75.40
Working late? Evening hours on Thursday until 20:00
