Additional weight made of stainless steel suitable for HPI Zündungen from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds / mopeds with blower.
The weight is mounted underneath the blower wheel. The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lightened flywheel.
You can find the corresponding flywheel and other attachments in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
| Thickness | 5 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Chrome steel (known as Nirosta®) |
| Surface | blank |
| Ø outside | 117 mm |
| Ø inside | 71.8 mm |
| Ø bolt circle | 101 mm |
| Number of fixing points | 4 pcs |
| Ø mounting hole | 5 mm |
| Weight | 250 g |
| Area of application | Performance, Racing, High End, Tuning |
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g · Area of application: Tuning
EUR 360.30
HPI racing ignition clockwise without light
Material: Aluminum · Material: Steel · Manufacturer: HPI · Mounting type: Screws · Number of fixing points: 3 pcs · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Weight: 424 g · Area of application: Tuning
EUR 336.20
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Thread type: MF27x1 LH (fine/left-hand thread) · Weight: 337 g
EUR 115.20
HPI stator ignition
Ø inside: 27.5 mm · Ø outside: 90 mm · Manufacturer: HPI · Material: Aluminum · Surface: anodized · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: black · Tension: 12 V · Performance: 60 W · Number of cables: 4 pcs · Number of fixing points: 6 pcs · Cable length: 640 mm · Ø bolt circle: 80 mm
EUR 180.10
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Weight: 87 g · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm
EUR 72.00
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: blank · Material: Chrome steel (known as Nirosta®) · Ø inside: 71.8 mm · Thickness: 1.8 mm · Ø mounting hole: 5 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø outside: 117 mm · Weight: 100 g
EUR 23.90
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Width: 100 mm · Total length: 63 mm · Height: 28 mm · Ø mounting hole: 7.5 mm · Hole spacing: 80 mm · Color: red · Number of fixing points: 2 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 366.30
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.90
EUR 26.44/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g · Area of application: Tuning
EUR 360.30
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Weight: 87 g · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm
EUR 72.00
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: blank · Material: Chrome steel (known as Nirosta®) · Ø inside: 71.8 mm · Thickness: 1.8 mm · Ø mounting hole: 5 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø outside: 117 mm · Weight: 100 g
EUR 23.90
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Ø cable: 7 mm · Tension: 12 V · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Performance: 60 W · Area of application: Tuning
EUR 450.40
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Ø inside: 39 mm · Weight: 87 g · Material: Aluminum · Surface: anodized · Color: red · Ø mounting hole: 6 mm · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø outside: 120 mm · Number of fixing points: 10 pcs
EUR 75.10
Collection only possible with online purchase and appointment.
