Wheel axle set with closed groove ball bearings (Ø 29 mm) for front wire spoke wheels on your Puch moped / moped.
The set consists of a 165 mm long wheel axle, two special ball bearings and all required nuts and spacers.
The innovation set works with spoke hubs (spoke rims).
The cable ties show you where to fit what:
- Red cable tie: wheel hub
- green cable tie: brake anchor plate
- Yellow cable tie: Replacement disk for the speedometer drive (the disk is removed if a drive is fitted)
- Blue cable ties: fork braces
Note: When mounting the ball bearings, it is important to ensure that the long spacer between the two ball bearings is mounted without play to ensure that the two bearings press with the inner ring on the bushing. If this is not observed, the ball bearings will inevitably jam.
| Material | Steel |
| Total length | 165 mm |
| Height | 9.9 mm, 5.9 mm |
| Ø inside | 12 mm |
| Manufacturer | swiing® ingenious parts |
| Ø outside | 29.02 mm |
| Surface | galvanized (blue) |
| Width | 35.7 mm, 6.6 mm, 11 mm, 2.7 mm |
| Thread length | 40.5 mm, 50 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Width across flats | 19 mm |
| Ø shaft | 11.95 mm |
| Shank length | 74.5 mm |
| Ball bearing closed | Yes |
| Puch |
Ratings
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Height: 10 mm · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Strength class: 8 · Area of application: Standard · Thread depth: 10 mm
EUR 2.40
swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch
Material: Steel · Total length: 190 mm · Ø inside: 12 mm · Manufacturer: swiing® ingenious parts · Ø outside: 29 mm · Surface: galvanized (blue) · Diameter: 29 mm · Thread length: 29 mm · Thread length: 53 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Ø shaft: 19 mm · Shank length: 100 mm · Ball bearing closed: Yes
EUR 47.20
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing type: Deep groove ball bearing · Inner ring width: 9 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Plastic · Material: Steel · Surface: blank · Ø outside: 29.02 mm · Ø inside: 12 mm · Width: 9 mm
EUR 10.80
66HEROES pointed nut "Spike" M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 8.40
swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Total length: 165 mm · Thread length: 40.5 mm · Thread length: 50 mm · Shank length: 74.5 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 34.5 mm · Height: 5.9 mm · Height: 9.9 mm · Width across flats: 19 mm · Ball bearing closed: Yes
EUR 47.20
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.00
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Material: Nylon · Color: black · Total length: 19 mm · Ø inside: 16.2 mm · Manufacturer: swiing® revival parts · Ø outside: 20.2 mm · Surface: blank · Bearing type: Plain bearing · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 3.05
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Nipple length: 14 mm · Manufacturer: GPO · Surface: raw · Quantity: 36 pcs · Length from hook: 188 mm · Ø spoke head: 5.35 mm · Thread length: 11 mm · Ø spoke: 2.9 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Hook angle: 95 °
EUR 66.70
swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch
Material: Steel · Total length: 190 mm · Ø inside: 12 mm · Manufacturer: swiing® ingenious parts · Ø outside: 29 mm · Surface: galvanized (blue) · Diameter: 29 mm · Thread length: 29 mm · Thread length: 53 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Ø shaft: 19 mm · Shank length: 100 mm · Ball bearing closed: Yes
EUR 47.20
Hot 
Inner cable set automatic | Puch E50
Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Quantity: 4 pcs
EUR 12.00
Collection only possible with online purchase and appointment.
