Stainless steel front fender for your Puch Maxi S or N moped (older model) with 17-inch rims.
The high-gloss polished finish ensures a first-class appearance and gives your moped the shine it deserves.
Since the fender is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury. In this version, the holes for the edge protectors at the front and rear are already pre-drilled.
Shape: rectangular
; fender profile width (A): 82 mm
; fender profile height (B): 35 mm
; ends: folded
closed on both sides; material: Chrome steel (commonly known as “Nirosta”), high-gloss polished
Total height from contact surface to top edge (C): 200 mm
Total length across ends (D): 565 mm
Circumference (E): 740 mm
You can find additional parts for your bike fairing, such as stainless steel polish or mounting hardware, in the accessories section.
A nostalgic product meeting the highest standards from the swiing® quality brand.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Folding the ends | not folded |
| Shape of the mudguard | angular |
| Wheel size | 17 " |
| Total length over ends | 565 mm |
| Scope | 740 mm |
| Mounting type | Nuts & bolts |
| Wide mudguard profile | 82 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 200 mm |
| Color | Chrome |
| Puch |
Accessories & related products
swiing® revival 17" rear fender Inox | Puch Maxi N
Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Manufacturer: swiing® revival parts · Wheel size: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: angular · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm · Mounting type: Nuts & bolts · Color: Chrome
EUR 45.70
swiing® revival screw set front fender Inox | Puch Maxi S, N
Storage method: Sack · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Number of components: 30 pcs · Drive: External hexagon · Drive: Slot · Thread length: 10 mm · Thread length: 15 mm · Screw head: Hexagon · Screw head: Lens head · Shank: No · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Width across flats: 8 mm · Strength class: A2-70
EUR 15.30
Explore categories from Mudguard
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø wire: 2.4 mm · Ø inside: 25.5 mm · Ø outside: 30 mm · Total length: 125 mm · Leg length: 45 mm · Length spring hook: 50 mm · Material: Spring steel · Surface: galvanized (blue) · Area of application: Original · Area of application: Standard
EUR 5.90
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Wheel size: 17 " · Valve type: TR6 car valve · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 "
EUR 18.00
IMCA shock absorber 30 cm black
Manufacturer: IMCA · Material: Steel · Surface: varnished · Color: black · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Ø Fastening inside: 10 mm · Ø spars: 28 mm · Total length: 330 mm · Mounting type: Nuts & bolts · Hole spacing: 300 mm · Number of fixing points: 2 pcs
EUR 72.20
Hot 
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 42.10
Working late? Evening hours on Thursday until 20:00
