Socket axle M11x180 made of heavy-duty, galvanized special steel with cones and nuts for various rear wheels with cast spokes on your Puch moped / moped.
The complete threaded shaft set is also equipped with the following parts:
- 3 pieces of M11 x 1 nuts (SW19 / 10 mm)
- 4 pieces of washers (11.2/20/2 mm)
- 2 pieces of swiing bearing cone M11 (D18 x H14.15 mm / SW15)
- 2 pieces of M11 x 1 nuts (SW17 / 4 mm)
- 1 piece of spacer (12.3/19x6 mm)
&p;reworked version of the previously offered wheel axle. Both the axle and the cones are made of high-quality material that can withstand high loads.
The ends of the wheel axle are chamfered and the thread is perfectly cut. This makes it easy to fit the cones and wheel nuts.
Other axle parts can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Ø shaft | 10.95 mm |
| Shank length | 30 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Width across flats SW | 19 mm |
| Thread length | 75 mm |
| Total length | 180 mm |
| Puch |
Accessories & related products
swiing® revival wheel axle set M11x180 mm spoke rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Shank length: 30 mm · Total length: 180 mm · Thread type: MF11x1 (fine pitch thread) · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm · Ball bearing closed: No · Thread length: 75 mm
EUR 47.90
CIF wheel axle set M11x1 x 200 mm galvanized
Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Height: 2 mm · Height: 4 mm · Height: 10 mm · Total length: 200 mm · Ø shaft: 10.3 mm · Shank length: 14.5 mm · Thread type: MF11x1 (fine pitch thread) · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Thread length: 92 mm
EUR 17.90
Bearing cone M11x1 mm
Surface: gas nitrided · Material: Steel · Ø outside: 19 mm · Height: 12 mm · Color: graphite colors · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats SW: 15 mm
EUR 9.50
66HEROES cap nut M11x1 stainless steel polished
Thread type: MF11x1 (fine pitch thread) · Height: 26.2 mm · Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Surface: polished · Nut type: Cap nut · Drive: External hexagon · Thread depth: 23.4 mm · Width across flats SW: 17 mm
EUR 14.30
swiing® revival wheel bearing set M11x1
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF11x1 (fine pitch thread) · Diameter: 17.95 mm · Ø outside: 29 mm · Ø inside: 25.85 mm · Height: 10.6 mm · Height: 14.15 mm · Width across flats SW: 15 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 52.70
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.90
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6001 · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Ø inside: 12 mm · Bearing type: Deep groove ball bearing · Ø outside: 28 mm · Width: 8 mm · Ball bearing closed: Yes · Area of application: Standard
EUR 7.10
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 11.90
swiing® revival wheel axle set M11x1 x 180 cast rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Shank length: 30 mm · Total length: 180 mm · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm · Ball bearing closed: No · Thread length: 75 mm
EUR 59.90
Collection only possible with online purchase and appointment.
