Cast aluminum rear wheel hub compatible with the cast wheel rim on your Puch Maxi S moped with a Z50 engine.
Among other things, this wheel hub can also be installed on Puch Maxi and Supermaxi models with an E50 engine or an air-cooled ZA50 engine, as well as on Puch X30 NG-2AH or NG-2A models with a fan-cooled ZA50 engine, provided that a conversion to a coaster brake is desired.
The high-quality wheel hub was manufactured using the casting process, just like the original from back then, and then precisely machined using CNC technology. The press-fit brake drum is made of high-quality special steel and is firmly connected to the cast hub by cast-in aluminum pins.
To put a huge smile on your face right from the moment you start the installation, the hardened bearing shells are already pressed into the coaster brake hub.
Notes:
This wheel hub was installed as standard on Puch Maxi S models with coaster brakes in Germany. Swiss models can be retrofitted accordingly.
Sprockets with a bolt circle diameter of 115 mm and an inner diameter of 98 mm are required.
You’ll find a complete coaster brake mechanism, a matching brake anchor plate, as well as brake cams, brake pads, and sprockets in the accessories section.
A nostalgic product from the premium swiing® brand that meets the highest standards.
| Total length | 89 mm |
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | glass bead blasted |
| Ø drum | 90 mm |
| Ø bolt circle | 115 mm, 106 mm |
| Number of fixing points | 5 pcs |
| Puch |
Accessories & related products
swiing® revival wheel nut M10.5x1 x 7 SW22 coaster brake Inox
Height: 7 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut 0.8D · Thread type: MF10.5x1 (fine pitch thread) · Nominal diameter (thread): 10.5 mm · Drive: External hexagon · Width across flats: 22 mm
EUR 9.55
Not in stock
swiing® revival wheel nut M10.5x1 x 5 SW22 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Height: 5 mm · Thread type: MF10.5x1 (fine pitch thread) · Nominal diameter (thread): 10.5 mm · Width across flats: 22 mm
EUR 8.95
GPO Gear Ring, 45 Teeth, 4-Hole, Grimeca / Snowflake Rim
Manufacturer: GPO · Material: Steel · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Surface: galvanized (blue) · Number of teeth: 45 pcs · Color: silver · Ø inside: 98 mm · Cranking (offset): 9 mm · Ø bolt circle: 115 mm · Number of fixing points: 4 pcs
EUR 53.00
ESJOT Gear Ring, 45 teeth, 4/5/6-hole, Ø 98 mm, offset, galvanized
Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Chain type: 415H · Ø inside: 98 mm · Chain pitch: 1/2" x 3/16" · Thickness: 4.5 mm · Number of teeth: 45 pcs · Ø bolt circle: 115 mm · Number of fixing points: 4 pcs · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs · Ø mounting hole: 6.6 mm · Cranking (offset): 10 mm
EUR 42.10
ESJOT Gear Ring, 42 teeth, 4/5/6 holes, Ø 98 mm, offset, galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 98 mm · Thickness: 4.5 mm · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 42 pcs · Ø bolt circle: 115 mm · Number of fixing points: 4 pcs · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs · Ø mounting hole: 6.6 mm · Cranking (offset): 10 mm
EUR 42.10
ESJOT Gear Ring, 40 teeth, 4/5/6 holes, Ø 98 mm, offset, galvanized
Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Chain type: 415H · Ø inside: 98 mm · Chain pitch: 1/2" x 3/16" · Thickness: 4.5 mm · Number of teeth: 40 pcs · Ø bolt circle: 115 mm · Number of fixing points: 4 pcs · Number of fixing points: 5 pcs · Number of fixing points: 6 pcs · Ø mounting hole: 6.6 mm · Cranking (offset): 10 mm
EUR 42.10
swiing® revival brake anchor plate HR 905 rear coaster hub | Puch Maxi S, X30 NS / NL
Ø outside: 91.9 mm · Manufacturer: swiing® revival parts · Ø axle: 10.6 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 90 mm · Ø bore: 10 mm · Ø shaft: 10 mm · Total length: 193 mm · Cranking (offset): 13 mm · Puch OEM number: 349.541.507.0
EUR 156.70
swiing® revival bearing cone M10.5x1 with dust ring back pedal
Height: 13.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Thread type: MF10.5x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Width across flats: 15 mm · Puch OEM number: 320.2.41.014.1
EUR 36.10
Normio M8x1 nut, medium height, galvanized
Height: 3.8 mm · Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Thread type: MF8x1 (fine pitch thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Width across flats: 13 mm · Strength class: 4
EUR 0.85
Explore categories from Hub & axle
Moped fans also bought
swiing® revival Ball Holder 25/37/6.3 Kickbike
Bearing type: Ball ring · Bearing cage: Sheet steel cage ball-guided · Width: 6.8 mm · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Ø inside: 25 mm · Ø outside: 36 mm
EUR 9.55
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Piaggio OEM number: 270460
EUR 2.90
Working late? Evening hours on Thursday until 20:00
