
A supposed 19 mm Bing SRF replica carburetor.
The passage is slightly conical, so that the diameter is 19 mm on the outside, but only slightly larger than 17 mm in the middle.
The carburetor is not of the same quality as original Bing products, but is a good and inexpensive alternative.
Sink block is for nozzles with M4 thread.
ØAir filter screen: 60.2 mm
Connection diameter to intake manifold: 23 mm
Mounted nozzle size: unknown
| Nominal diameter | 17 mm |
| Component group Carburetor | Carburetor complete |
| Carburetor type | SRF |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 60.2 mm |
| Ø Internal connection | 23 mm |
| Ø fuel hose connection | 6 mm |
| Mounting type | Plug connection clamped |
| Choke control | Hand choke |
| Area of application | Tuning |
| Nozzle thread | M4x0.7 (standard thread) |
| Puch |
| Zündapp Belmondo |
| Kreidler |
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.90
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Surface: chrome-plated · Thread size: M8 · Thread type: M8x1.25 (standard thread) · Total length: 360 mm · Color: Chrome · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Clamping diameter: 22 mm · Mirror rod length: 300 mm
EUR 33.70
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Nipple length: 10 mm · Area of application: Standard · Piaggio OEM number: 270460
EUR 2.90
Not in stock
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Manufacturer: swiing® ingenious parts · Camouflaged: No · Material: Aluminum · Total height: 42 mm · Total length: 35 mm · Ø inside: 16 mm · Hole spacing inlet: 40 mm · Height flange center hole: 35 mm · Ø External connection: 23 mm · Mounting type: Screws · Area of application: Tuning · Number of fixing points: 2 pcs
EUR 48.10






