40 mm cylinder compatible with your Honda Camino moped.
The cast steel cylinder is of good quality and is solidly constructed.
Before installation, check the piston clearance and the piston ring clearance.
Cylinder material: Piston material: gray
cast iron; Piston material: cast
aluminum; Bore: 40 mm
; Displacement: 49 cm³
; Cylinder base diameter: 50.9 mm
; Internal exhaust port diameter: 34 mm
; Exhaust port hole spacing: 46 mm
; Exhaust port thread: M6 x 1
; Hole pattern: 48 x 48 mm
Ø Stud hole: 7 mm
Piston pin: 10 mm
Decompressor hole: yes
Scope of delivery as shown in Figure 1.
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find compatible exhaust systems and other practical parts in the accessories section.
Brand-name product from the manufacturer DMP.
| Nominal diameter | 40 mm |
| Manufacturer | DMP |
| Material | Gray cast iron |
| Surface | varnished |
| Displacement | 50 ccm |
| Ø cylinder neck | 50.9 mm |
| Ø Outlet outside | 34 mm |
| Ø piston pin (B) | 10 mm |
| Outlet type | slanted |
| Hole spacing outlet | 46 mm |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 48 x 48 |
| Decompressor | Yes |
| Camouflaged | No |
| Area of application | Standard |
| Honda |
Accessories & related products
Explore categories from Cylinder
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4 mm
EUR 15.10
Hot
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Thread type: MF26x1 (fine pitch thread) · Color: Chrome · Color: black · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Adjustable: No · Head tube length: 180 mm · Total length: 580 mm · Thread length: 57 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm
EUR 160.30
Hot
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Capacity: 0.16 µF · Area of application: Original · Area of application: Standard · Mounting type: Plug connection clamped · Height: 23 mm · Connection type: Thread for screwing · Ø outside: 18 mm · Thread type: M3x0.5 (standard thread) · Total height: 32 mm · BOSCH OEM number: 2 207 330 050
EUR 11.90
Polini air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Camouflaged: No · Material: Plastic · Width: 98 mm · Filter type: Foam · Ø outside: 53 mm · Height: 94.7 mm · Total length: 29 mm · Ø Internal connection: 50.6 mm · Color: black · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 18.00
Gasket set engine & cylinder | Honda Camino
Material: Aluminum · Material: Graphite / Graphite · Material: Sealing paper · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 5 mm · Hole spacing outlet: 42 - 42.5 mm · Number of components: 5 pcs · Area of application: Original · Area of application: Standard
EUR 18.00
Working late? Evening hours on Thursday until 20:00
