Chrome-plated frame reinforcement from EBR suitable for Puch Maxi S / N mopeds.
This is often used on tuned mopeds to protect the frame from deformation due to the extra power.
The two rods have an outer diameter of 18 mm.
Length of mounting hole - stop (adjustable): Approx. 56 - 59 cm
Internal dimension for frame mount: 47 mm
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Ø outside | 18 mm |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Total length | 560 - 590 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 3 pcs |
| Hole spacing | 47 mm |
| Puch | E50 |
Explore categories from Formwork & frame parts
Moped fans also bought
GPO mudguard strut silver | Puch Maxi S, N
Manufacturer: GPO · Wide intake: 53 mm · Material: Steel · Outer width: 25.5 mm · Surface: varnished · Color: silver · Mounting type: Nuts & bolts · Wheel size: 17 " · Number of fixing points: 8 pcs · Distance mudguard - center hole: 197 mm · Distance mudguard - center hole: 231 mm · Hole spacing: 40 mm · Ø mounting hole: 6 mm · Total length: 240 mm
EUR 15.10
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Color: Chrome · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: angular · Mounting type: Nuts & bolts · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Wheel size: 17 "
EUR 42.10
swiing® revival 17" rear fender primed | Puch Maxi N
Manufacturer: swiing® revival parts · Color: black · Material: Steel · Surface: primed · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: angular · Mounting type: Nuts & bolts · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm · Wheel size: 17 "
EUR 40.90
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Manufacturer: AKOA · Material: Plastic · Color: black-matt · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 26 mm · Ø inside: 20.7 mm · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 36.10
swiing® revival Screw Set, Engine, Stainless Steel, Small | Puch E50
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Chrome steel (colloquially known as stainless steel) · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Puch OEM number: 900.1216 · Puch OEM number: 900.1308
EUR 24.00
Self-tapping screw, Ø 2.9 x 13, pan head, Phillips, stainless steel
Material: Chrome steel (colloquially known as stainless steel) · Thread type: Sheet metal screw · Nominal diameter (thread): 2.9 mm · Drive: Cross recess · Screw head: Lens head · Shank: No · Thread length: 13 mm · Total length: 13 mm
EUR 1.10
swiing® revival screw set front fender Inox | Puch Maxi S, N
Storage method: Sack · Manufacturer: swiing® revival parts · Strength class: A2-70 · Material: Chrome steel (colloquially known as stainless steel) · Number of components: 30 pcs · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Screw head: Lens head · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Thread length: 10 mm · Thread length: 15 mm · Shank: No · Width across flats: 8 mm
EUR 15.30
Working late? Evening hours on Thursday until 20:00
