Racing kit with 44 mm diameter for your Tomos moped / moped with A35 engine.
This 65 cc racing cylinder made of aluminum with nickel-silicon carbide coating (colloquially known as Nikasil) impresses with its good workmanship and long service life.
In order to get the full power out of the tuning cylinder, a racing exhaust and a carburetor with plenty of oomph should be fitted.
All necessary gaskets, piston pins, piston rings and circlips are included in the scope of delivery.
Note: Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Nominal diameter | 44 mm |
| Manufacturer | GPO |
| Material | Aluminum |
| Camouflaged | No |
| Displacement | 65 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 47.8 mm |
| Surface | sandblasted |
| Ø outlet inside | 22.8 mm |
| Inlet window | 35.5 x 29.5 mm |
| Ø piston pin (B) | 12 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 36 mm, 39 mm |
| Number of fixing points | 4 pcs |
| Outlet type | slanted |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Area of application | Tuning |
| Decompressor | No |
| Tomos |
Accessories & related products
GPO piston 44 mm (12 mm KoBo) | Tomos A3/A35
Manufacturer: GPO · Ø outside piston (A): 43.96 mm · Compression height (C): 21.9 mm · Curvature (D): 4.15 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 44 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm
EUR 45.70
Explore categories from Cylinder
Moped fans also bought
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.95 mm · Total length: 30 mm · Nominal diameter (thread): 6 mm · Surface: galvanized (blue) · Strength class: 10.9 · Thread type: M6x1 (standard thread) · Thread length: 12 mm
EUR 2.20
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Nominal diameter: 15 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Width: 70 mm · Total length: 82 mm · Carburetor type: SHA · Height: 100 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 59 mm · Ø Internal connection: 18 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 68 · Area of application: Racing · Area of application: Tuning
EUR 84.30
DMP 44 mm cylinder head (higher compression) | Tomos
Manufacturer: DMP · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Ø cylinder: 44 mm · Total length: 145 mm · Width: 145 mm · Height: 66 mm · Surface: glass bead blasted · Ø screw holder: 8 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44
EUR 72.20
Working late? Evening hours on Thursday until 20:00
