Base plate suitable for the three-jaw centrifugal clutch of Puch mopeds / mopeds with E50 engines.
The clutch carrier is made of steel and is extended. The mounting pins can be secured with circlips. In addition, M4 threads are cut into the pins so that a reinforcement plate can be fitted.
You can find the mentioned plate, clutch linings, complete clutches and the clutch hub without threaded holes in the accessories section.
Original Puch spare part number: 349.1.12.504.2
| Material | Steel |
| Number of jaws | 3 pcs |
| Recording type | Cone mounting |
| Thickness | 19.1 mm |
| Ø inside | 11.85 mm |
| Ø outside | 92.6 mm |
| Area of application | Standard |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Color: blue · Surface: coated · Area of application: Tuning · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Ø wire: 1.7 mm · Number of components: 3 pcs
EUR 21.60
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Ø outside: 93 mm · Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Material addition: Composite materials · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of jaws: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Thickness: 21.2 mm · Recording type: Cone mounting · Number of springs: 3 pcs
EUR 506.50
EUR 446.10
Hot 
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Thickness: 22 mm · Ø outside: 94 mm
EUR 144.60
Explore categories from Clutch
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Number of components: 7 pcs · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.90
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Ø inside: 12 mm · Bearing type: Needle roller and cage assembly · Ø outside: 15 mm · Width: 16.2 mm · Dimension needle bearing: 12/15 x 16.2 · Tomos OEM number: 035548
EUR 16.80
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Drive: External hexagon · Width across flats: 17 mm · Manufacturer: swiing® revival parts · Height: 8 mm · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm
EUR 4.70
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Thickness: 0.5 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
