Reinforced clutch designed for your Puch moped with an E50 pedal-start engine. The clutch is rated for racing kits up to 65 cc.
The clutch itself is designed with a reinforcement plate for added stability, which prevents twisting under pressure.
In addition to the included springs, the package contains a splined disc, a kick starter pinion, an adapter disc, and the hex nut required for installation.
The four spring strengths for the respective applications:
- Red (pre-installed springs with thin wire): correspond to the original clutch springs.
- Blue: Stronger spring, for slightly tuned engines.
- Yellow: Stronger spring, for moderately tuned engines.
- Red: Strongest spring, high-end tuning.
Before installing the centrifugal clutch, ensure that the openings of the retaining rings—also known as BZ rings—face outward. This prevents the BZ rings from coming loose during operation.
Note:
We do not recommend using the yellow and red springs (high-end), as the high rotational speed during engagement causes increased friction. This leads to high temperatures and can ultimately result in the clutch being destroyed due to overheating. For better results, we recommend using swiing® springs or even switching to an aramid clutch.
You can find everything you need for clutch overhauls—including springs, aramid clutches, kick-start clutches, and alternatives for kick-start engines—in the accessories section.
Brand-name product from the manufacturer NC-MOTORPARTS.
| Ø inside | 12 mm, 14.3 mm |
| Ø outside | 92 mm |
| Manufacturer | NCMotorparts |
| Material | Steel, Composite materials |
| Number of jaws | 3 pcs |
| Recording type | Cone mounting |
| Number of springs | 12 pcs |
| Thickness | 22.15 mm |
| Area of application | Road use, Tuning |
| Puch | E50 |
Accessories & related products
Hot 
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Ø outside: 93 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Thickness: 20.9 mm
EUR 60.20
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Area of application: Tuning · Color: blue
EUR 21.60
ASP clutch 3-jaw "sheet" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Number of jaws: 3 pcs · Number of springs: 6 pcs · Recording type: Cone mounting · Thickness: 21.5 mm · Ø outside: 91.5 mm · Area of application: Racing · Area of application: Tuning
EUR 289.40
ASP clutch 2-jaw "sheet" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Number of jaws: 2 pcs · Number of springs: 4 pcs · Thickness: 21.5 mm · Ø outside: 91.5 mm · Area of application: Racing · Area of application: Tuning · Alternative version of the Puch OEM number: VM 477.0 · Alternative version of the Puch OEM number: 349.1.12.004.0
EUR 204.90
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Number of jaws: 3 pcs · Number of springs: 6 pcs · Recording type: Cone mounting · Thickness: 21.5 mm · Ø outside: 91.5 mm · Area of application: Racing · Area of application: Tuning
EUR 289.40
NC-Motorparts Reinforced Clutch for Kick Starter | Puch E50
Manufacturer: NCMotorparts · Material: Steel · Number of jaws: 3 pcs · Number of springs: 12 pcs · Recording type: Cone mounting · Thickness: 22.15 mm · Ø outside: 92 mm · Ø inside: 12 mm · Ø inside: 14.2 mm · Area of application: Road use · Area of application: Tuning
EUR 120.50
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Number of components: 7 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.90
EUR 10.70
swiing® revival Stud Bolt Set M6x106 | Puch
Diameter: 5.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Nominal diameter (thread): 6 mm · Drive: External hexagon · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Thread type: M6x1 (standard thread) · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.95
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Nominal diameter (thread): 10 mm · Drive: External hexagon · Height: 8 mm · Width across flats: 17 mm · Thread type: MF10x1 (fine pitch thread)
EUR 4.70
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Thickness: 1 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.70
Hot
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Thread type: MF10x1 (fine pitch thread) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 968 g · Number of gears: 1 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
EUR 223.00
Not in stock
Working late? Evening hours on Thursday until 20:00
