Polini CP 17.5 carburetor for your racing moped, moped and small motorcycle with the highest demands. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main nozzle: 80
Installed secondary nozzle: 36
Ø Nominal: 17.5 mm
Ø Connection air filter: 46 mm
Ø Connection intake manifold: 25 mm
Alternative racing carburetors, the sleeve for mounting and the matching nozzles can be found under accessories.
Quality product from the Italian manufacturer Polini.
| Nominal diameter | 17.5 mm |
| Manufacturer | Polini |
| Camouflaged | No |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Width | 66 mm |
| Height | 132 mm |
| Ø Inside entrance | 42 mm |
| Ø Output inside | 21.5 mm |
| Ø Air filter connection | 47 mm |
| Area of application | Tuning, Racing, Performance |
| Total length | 71 mm |
| Ø fuel hose connection | 6 mm, 7 mm |
| Mixed oil connection | Yes |
| Mounting type | Rubber sleeve |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 80 |
| Size of secondary nozzle | 36 |
Accessories & related products
Polini CP 17.5 mm carburetor (hand choke)
Nominal diameter: 17.5 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: CP · Mounting type: Plug connection clamped · Choke control: Hand choke · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 62 · Area of application: Tuning · Size of secondary nozzle: 40
EUR 168.10
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 54 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 48.00
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78
EUR 48.00
Polini 26 mm carburetor (hand choke)
Material: Aluminum · Nominal diameter: 26 mm · Total length: 83 mm · Width: 65 mm · Height: 155 mm · Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 105 · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Size of secondary nozzle: 45
EUR 174.10
Polini CP 15 mm carburetor (hand choke) rubber flange
Material: Aluminum · Nominal diameter: 15 mm · Total length: 71 mm · Width: 66 mm · Height: 132 mm · Manufacturer: Polini · Mounting type: Rubber sleeve · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 70 · Ø Inside entrance: 42 mm · Ø Output inside: 21 mm · Ø Air filter connection: 47 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle block: 35-12 · Size of secondary nozzle: 36
EUR 162.10
Polini CP 19 mm carburetor (hand choke) rubber flange
Nominal diameter: 19 mm · Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: CP · Mounting type: Rubber sleeve · Choke control: Hand choke · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 71 mm · Ø Inside entrance: 42 mm · Ø Output inside: 21.8 mm · Ø Air filter connection: 47 mm · Width: 66 mm · Height: 132 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 90 · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 40
EUR 156.10
EUR 180.10
Moped fans also bought
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Width: 150 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Ignition system: BOSCH · Color: Chrome · Ignition system: DUCATI · Color: black-matt · Height: 88 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Total length: 160 mm · Hole spacing: 137.5 mm
EUR 180.10
GPO sprocket 40 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Material: Steel · Surface: powder-coated · Color: black · Manufacturer: GPO · Number of fixing points: 6 pcs · Hole spacing: 36.5 mm · Ø mounting hole: 6.7 mm · Number of teeth: 40 pcs · Ø inside: 94 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 106 mm
EUR 23.90
Fuel tap horizontal M16x1 (with union nut) outgoing at the bottom
Mounting type: Union nut · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF16x1 (fine pitch thread) · Spare tube shape: straight
EUR 15.50
Collection only possible with online purchase and appointment.
