Shaft seal ring with sealing lip made of PTFE (colloquially known as Teflon) with the dimensions 17x35x8 mm for use on the crankshaft of your Puch X30 Sport and Velux moped / moped with Z50 engine.
This heavy-duty shaft seal ring can be used instead of a standard 17x35x8 seal on the timing side. Due to the larger surface area, a better fit is achieved in the housing, which in turn leads to improved sealing.
This radial shaft seal with the high-tech material fluorocarbon rubber outer jacket is resistant up to a temperature of 200 °C, and even up to 220 °C for short periods.
Historical NBR shaft seals are temperature-resistant up to 100 °C.
FPM or FKM shaft seals (colloquially known as Viton) are particularly suitable for racing, as they are designed for higher speeds and can therefore withstand higher temperatures.
The oil seal (colloquially known as a radial shaft seal) has an additional sealing lip made of PTFE, a thermally highly resilient material that does not interact with the lubricant and can therefore withstand the highest loads.
Note: This housing seal ring can only be used on the ignition side and not on the clutch side. A radial shaft seal with the dimensions 17/35/7 must be used on the clutch side.
Manufacturer: Polini · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized · Area of application: Tuning · Place of use: Crankshaft, Universal · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 17 mm · Ø outside: 35 mm · Width: 8 mm
| Temperature resistance (min.) | 200 °C |
| Shaft seal type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Manufacturer | Polini |
| Material | FPM / FKM (colloquially known as Viton) |
| Place of use | Crankshaft |
| Surface | rubberized |
| Width | 8 mm |
| Ø outside | 35 mm |
| Ø inside | 17 mm |
| Area of application | Tuning |
| Alternative version of the Puch OEM number | 900.3807 |
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) |
Ratings
Accessories & related products
Oil seal NBR 17/35/7 AS crankshaft | Puch X30
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Place of use: Crankshaft · Material: NBR · Surface: rubberized · Width: 7 mm · Ø outside: 35 mm · Ø inside: 17 mm
EUR 9.55
Oil seal FPM 17/40/7 A | Puch E50
Temperature resistance (min.): -30 - 200 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Puch · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized · Width: 7 mm · Ø outside: 40 mm · Ø inside: 17 mm
EUR 11.90
Oil seal FPM 22/40/7 AS crankshaft | Puch E50
Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Puch · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized · Width: 7 mm · Ø outside: 40 mm · Ø inside: 22 mm
EUR 16.80
Explore categories from Seals & gaskets
Moped fans also bought
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm
EUR 22.80
GPO brake anchor plate front 11 mm axle (1A quality) | Puch Maxi S, N / X30 Sport NS, NL / Velux
Manufacturer: GPO · Material: Aluminum · Thread size: M6 · Ø External brake pads: 80 mm · Ø outside: 95 mm · Ø axle: 11 mm · Ø bore: 11.3 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 78 mm
EUR 72.20
Oil seal NBR 17/35/7 A DUO crankshaft | Puch Z50
Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 35 mm · Width: 7 mm · Manufacturer: Puch · Material: NBR · Surface: rubberized
EUR 8.95
Rito crankshaft Racing (Version 2023) | Puch X30 NS, NL / Velux (Z50)
Manufacturer: Rito · Weight: 913 g · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Number of gears: 2 pcs · Thread length: 8.5 mm · Thread length: 12 mm · Total length of crankpin on clutch side: 58 mm · Total length crankpin ignition side: 67.5 mm · Ø crank webs: 69.8 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Ø Bearing seat (ignition side): 17 mm · Area of application: Racing · Area of application: Tuning · Dimension needle bearing: 12 / 15 x 14.7 mm (axe 12) · Wide crank webs: 34.3 mm · Length 1st paragraph: 19 mm · Length 2nd paragraph: 18.5 mm · Ø 1st step (on the coupling side): 17 mm · Ø 2nd shoulder (on the clutch side): 15 mm · Length of shoulder (ignition side): 18 mm · Puch OEM number: 349.1.10.215.0 · Puch OEM number: 350.7.10.015.0
EUR 241.10
Polini oil seal FPM / PTFE 17/35/8 AS
Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Polini · Place of use: Crankshaft · Material: FPM / FKM (colloquially known as Viton) · Place of use: Universal · Surface: rubberized · Ø outside: 35 mm · Ø inside: 17 mm · Width: 8 mm · Area of application: Tuning
EUR 18.00
swiing® ingenious plain bearing clutch basket Racing | Puch Z50
Manufacturer: swiing® ingenious parts · Material: special bearing bronze · Nominal diameter inside: 15 mm · Ø outside: 17 mm · Ø inside: 15 mm · Total height: 16.2 mm · Area of application: Racing · Area of application: Tuning · Puch OEM number: 050.1211
EUR 24.00
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
