Black thermoplastic reducer bushing for reducing the carburetor connection of Dell'Orto PHBG carburetors on your moped, moped and small motorcycle.
With this reducer bushing, various PHBG carburetors with an inner diameter of 26 mm (without reducer bushing) can be combined with an intake manifold with an outer diameter of 23 mm.
You can find more reducers as well as matching carburetors and intake manifolds in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Plastic |
| Component group Carburetor | Adjusting screws, float, etc. |
| Color | black |
| Total length | 16 mm |
| Ø Passage | 19 mm |
| Ø inside | 23 mm |
| Ø outside | 26 mm |
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Total length: 82 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Width: 70 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Height: 124 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45 · Mounting type: Plug connection clamped
EUR 144.10
Dell'Orto 21 mm PHBG CS carburetor hand choke
Nominal diameter: 21 mm · Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Material: Aluminum · Carburetor type: PHBG AS · Mounting type: Plug connection clamped · Total length: 82 mm · Width: 72 mm · Ø without reducing sleeve: 26 mm · Height: 125 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Area of application: Tuning · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Nozzle size: 92 · Size of secondary nozzle: 50
EUR 144.10
MLM 18 mm intake manifold Dell'Orto PHBG | Minarelli V1
Material: Steel · Surface: varnished · Color: black · Manufacturer: MLM · Mounting type: Screws · Number of fixing points: 2 pcs · Ø inside: 18 mm · Area of application: Tuning · Ø External connection: 23 mm · Hole spacing inlet: 40 mm
EUR 84.00
swiing® ingenious 17 mm intake manifold | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Area of application: Tuning · Ø inside: 17 mm · Number of fixing points: 2 pcs · Ø External connection: 23 mm · Hole spacing inlet: 32 mm · Mounting type: Stud bolt · Camouflaged: No
EUR 60.00
swiing® ingenious intake manifold 17 mm SRF | Puch Z50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø inside: 17 mm · Number of fixing points: 2 pcs · Ø External connection: 23 mm · Hole spacing inlet: 38 mm · Mounting type: Stud bolts & nuts · Total height: 73 mm · Height flange center hole: 61 mm · Total length: 45 mm · Camouflaged: Yes
EUR 60.00
Moped fans also bought
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Camouflaged: Yes · Surface: sandblasted · Displacement: 65 ccm · Material: Aluminum · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 108.00
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Surface: galvanized (blue) · Material: Steel · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
EUR 3.35
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Color: transparent · Color: white · Material: Plastic · Filter type: Plastic net · demountable: No · Total length: 23.4 mm · Total length: 50 mm · Ø inside: 3 mm · Ø outside: 20 mm · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm
EUR 6.95
Magura cable clamp Ø 7 x 9 mm
Manufacturer: Magura · Surface: blank · Surface: galvanized (blue) · Material: Chrome steel (known as Nirosta®) · Material: Steel · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Total length: 9 mm · Total length: 14.5 mm · Screw head: Countersunk head · Screw head: Hexagon · Thread type: M4x0.7 (standard thread) · Number of components: 1 pcs · Ø outside: 7 mm · Width across flats SW: 6 mm · Area of application: Standard · Thread length: 6 mm
EUR 3.00
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Ø inside: 15 mm · Ø outside: 30 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 6.50
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Quantity: 4 pcs · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.90
Collection only possible with online purchase and appointment.
