Hot 
Complete wheel axle with closed groove ball bearings with a diameter of 29 mm for front wire spoke wheels on your Puch moped / moped.
The set consists of a 165 mm long wheel axle, two special ball bearings and all required nuts and spacers.
The innovation set is suitable for spoke hubs with spoke rims.
The cable ties clearly show you which component is fitted in which position:
- Red cable tie: wheel hub
- Green cable tie: Brake anchor plate
- Yellow cable tie: Replacement disk for the speedometer drive. The disk is removed if a drive is fitted .
- Blue cable tie: fork spars
Note: When mounting the ball bearings, make sure that the long spacer between the two ball bearings is mounted without play. This is the only way to ensure that the inner ring of both bearings press cleanly against the bushing. If this is not observed, the ball bearings will inevitably jam.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Ball bearing closed | Yes |
| Ø shaft | 11.95 mm |
| Total length | 165 mm |
| Shank length | 74.5 mm |
| Width | 35.7 mm, 6.6 mm, 11 mm, 2.7 mm |
| Height | 9.9 mm, 5.9 mm |
| Thread length | 40.5 mm, 50 mm |
| Ø inside | 12 mm |
| Ø outside | 29.02 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Width across flats | 19 mm |
| Puch |
Ratings
Accessories & related products
Hot
swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch
Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 19 mm · Shank length: 100 mm · Diameter: 29 mm · Total length: 190 mm · Thread length: 29 mm · Thread length: 53 mm · Ø inside: 12 mm · Thread type: MF12x1 (fine pitch thread) · Ø outside: 29 mm · Width across flats: 19 mm
EUR 46.90
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing type: Deep groove ball bearing · Inner ring width: 9 mm · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Plastic · Material: Steel · Ø inside: 12 mm · Ø outside: 29.02 mm · Width: 9 mm
EUR 10.70
swiing® ingenious wheel axle with bearing conversion kit cast hub front | Puch
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® ingenious parts · Ball bearing closed: Yes · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Total length: 165 mm · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 34.5 mm · Height: 5.9 mm · Height: 9.9 mm · Thread length: 40.5 mm · Thread length: 50 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm
EUR 46.90
GPO speedo drive 17" with lugs 12 mm axle | Puch Maxi S / N, X30 Sport NS / NL, NG-2AH, X30 Velux
Place of use: left · Place of use: right · Manufacturer: GPO · Material: Aluminum · Wheel size: 17 " · Ø outside: 41 mm · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 12 mm · Ø axle: 12 mm · Thread type: MF10x1 (fine pitch thread) · Total height: 10 mm
EUR 33.70
Explore categories from Hub & axle
Moped fans also bought
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
EUR 11.90
Not in stock
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Material: Nylon · Manufacturer: swiing® revival parts · Bearing type: Plain bearing · Total length: 19 mm · Ø Bundle: 24.1 mm · Color: black · Ø inside: 16.2 mm · Ø outside: 20.2 mm · Puch OEM number: 349.1.42.005.1
EUR 3.00
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: raw · Color: silver · Quantity: 36 pcs · Length from hook: 188 mm · Ø spoke: 2.9 mm · Thread length: 11 mm · Ø spoke head: 5.35 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Hook angle: 95 °
EUR 66.20
Hot
swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch
Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 19 mm · Shank length: 100 mm · Diameter: 29 mm · Total length: 190 mm · Thread length: 29 mm · Thread length: 53 mm · Ø inside: 12 mm · Thread type: MF12x1 (fine pitch thread) · Ø outside: 29 mm · Width across flats: 19 mm
EUR 46.90
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
