Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Wheel size | 17 " |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Mounting type | Nuts & bolts |
| Scope | 1006 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Width: 105 mm · Height: 5.3 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.10
swiing® revival 17" front fender "Retro" Inox
Color: Chrome · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Folding the ends: closed folded · Wheel size: 17 " · Shape of the mudguard: round · Mounting type: Nuts & bolts · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm
EUR 72.20
Mudguard strut 17" chrome
Color: Chrome · Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Total length: 325 mm · Wheel size: 17 " · Distance mudguard - center hole: 315 mm · Mounting type: Nuts & bolts · Number of fixing points: 5 pcs · Wide intake: 65 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Hole spacing: 19 mm
EUR 15.60
Mudguard strut 16" chrome
Color: Chrome · Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Total length: 305 mm · Wheel size: 16 " · Distance mudguard - center hole: 290 mm · Mounting type: Nuts & bolts · Number of fixing points: 5 pcs · Wide intake: 75 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm
EUR 20.40
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Color: black-matt · Total length: 147 mm · Width: 105 mm · Height: 6 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm
EUR 15.60
Not in stock
Explore categories from Mudguard
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.10
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Width: 105 mm · Height: 5.3 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.10
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.40
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 13.10
EUR 29.11/l
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm · Rolling circumference: 1448 mm · Ø Pin: 4 mm
EUR 22.80
Manual indoor cable set
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.90
ESJOT sprocket 37 teeth coaster brake galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø inside: 94 mm · Number of teeth: 37 pcs · Thickness: 4.1 mm · Ø mounting hole: 6.5 mm · Hole spacing: 74 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs
EUR 57.80
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: black · Filter type: Racing screen · Height: 52 mm · Total length: 165 mm · Ø Internal connection: 20 mm · Width: 68 mm · Mounting type: Plug connection clamped · Area of application: Tuning
EUR 72.20
swiing® revival 17" front fender "Retro" Inox
Color: Chrome · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Folding the ends: closed folded · Wheel size: 17 " · Shape of the mudguard: round · Mounting type: Nuts & bolts · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm
EUR 72.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
