High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Number of fixing points | 3 pcs |
| Exhaust type | Cone / double cone |
| Mounting type | Nuts |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø outside: 95 mm · Total length: 830 mm · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 223.00
HOMOET Exhaust "P6 Special" 28 mm polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø outside: 88 mm · Total length: 935 mm · Ø Silencer: 50 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 355.70
Hot 
HOMOET "P6" Exhaust, 28 mm, Polished | Puch Maxi, X30
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Ø outside: 88 mm · Total length: 900 mm · Color: gray · Ø Silencer: 50 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Mounting type: Tab · Number of fixing points: 2 pcs · Flame tube attachment: Stud bolts & nuts
EUR 343.60
Not in stock
AKOA exhaust "Streetpower" | Puch Maxi S
Manufacturer: AKOA · Material: Steel · Surface: blank · Total length: 940 mm · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Mounting type: Nuts · Number of fixing points: 3 pcs
EUR 410.00
Not in stock
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Color: blue · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.60
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm · Number of components: 1 pcs
EUR 2.90
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Area of application: Standard · Cable length: 1600 mm · Number of components: 1 pcs
EUR 2.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Thread length: 4 mm · Screw head: Lens head · Total length: 6 mm · Number of components: 2 pcs
EUR 2.40
GPO 85° Carburetor Elbow M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: M5x0.8 (standard thread) · Height: 30 mm · Angle: 85 ° · Thread type: MF6x0.75 (fine pitch thread) · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.10
Polini CP 21 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: CP · Nominal diameter: 21 mm · Ø Inside entrance: 42 mm · Ø Output inside: 22.5 mm · Ø Air filter connection: 47 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Nozzle size: 100 · Size of secondary nozzle: 40 · Mounting type: Rubber sleeve · Total length: 71 mm · Width: 66 mm · Height: 132 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 168.70
Not in stock
Polini 43.5 mm cylinder kit reed valve with head | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Racing · Area of application: Tuning
EUR 482.30
Working late? Evening hours on Thursday until 20:00
