44 mm cylinder head with M12x1.5 mm decompression hole, compatible with the 44 mm swiing® tuning cylinder kit for the Zündapp Belmondo moped / mopeds with chassis number 71 and engine type 247, as well as the Zündapp M25 and M50 Bergsteiger mopeds with chassis number 434 and engine type 247.
In addition to these models, the racing kit also fits ALPA Spezial 3000 or ALPA Black River small motorcycles equipped with a Zündapp Type 247 engine.
The shoulder on the gasket side ensures that the cylinder head sits perfectly centered on the cylinder.
Note: If you want to install this cylinder head on an original Zündapp cylinder, you must raise it by 1.5 mm to prevent the piston from rubbing against the head.
Also note that, due to the design, you will need longer stud bolts.
You can find the stud bolts mentioned above, as well as the complete cylinder kit, in the accessories section.
A sophisticated product meeting the highest standards from the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Ø cylinder | 44 mm |
| Number of fixing points | 4 pcs |
| Decompressor | MF12x1.5 |
| Zündapp | Belmondo (Type 247-71) Moped 25 (M 25) / Moped M 50 Bergsteiger (Type 247-434) |
Accessories & related products
Loctite 638 Joining shaft-hub high-strength 10 ml
Temperature resistance (min.): -75 - 150 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: green · Contents: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m · Area of application: Chemistry
EUR 26.40
EUR 2’640.00/l
swiing® ingenious piston 44 mm Vertex | Zündapp Belmondo, Bergsteiger
Manufacturer: swiing® ingenious parts · Ø outside piston (A): 43.95 mm · Compression height (C): 25.05 mm · Curvature (D): 2.45 mm · Total piston height (E): 51.5 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 44 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Weight piston kit: 92 g
EUR 77.10
Not in stock
Explore categories from Cylinder
Moped fans also bought
17 mm Bing SRF carburetor (replica)
Material: Aluminum · Component group Carburetor: Carburetor complete · Width: 64 mm · Carburetor type: SRF · Height: 117 mm · Nominal diameter: 17 mm · Total length: 78 mm · Ø fuel hose connection: 6 mm · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Nozzle block: 2.xx · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 78.30
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Total height: 42 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø External connection: 23 mm · Total length: 35 mm · Hole spacing inlet: 40 mm · Ø inside: 16 mm · Height flange center hole: 35 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Camouflaged: No · Area of application: Tuning
EUR 48.10
swiing® ingenious Clutch Spring Set, Reinforced (+50%) | Zündapp Belmondo, Bergsteiger
Manufacturer: swiing® ingenious parts · Number of springs: 10 pcs · Area of application: Tuning · Alternative version of the Zündapp OEM number: 247-06.107 · Alternative version of the Zündapp OEM number: 281-06.101
EUR 66.20
swiing® ingenious exhaust manifold 28 mm left chrome | Zündapp Belmondo
Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Ø outside: 28 mm · Total length: 360 mm · Ø inside: 25 mm · Mounting type: Stud bolts & nuts · Hole spacing outlet: 40 mm · Number of fixing points: 2 pcs
EUR 60.20
Not in stock
Working late? Evening hours on Thursday until 20:00
